Hi Ross,
I just finished reading your issues with your microphone. I have a microphone for you that will do the job nicely.
It's an Shure SM58. You will find this microphone in almost every studio in the world. It's a basic dynamic microphone with a cardioid polar pattern.
I have 2 of theses and I don't really use them any more. I believe this microphone will suit you because of 3 things.
1) It's a dynamic microphone, which will be less sensitive to external noise.
2) It has a maximum SPL or 132dB or 142dB (depending on the load of your pre-map)
3) It's Free
A not about compression - yes it will take care of your overs but it will also bring up the noise floor. It may be entirely possible that the clipping and distortion might be your microphone actually distorting mechanically, and not electrically. Hence a high SPL microphone like the SM58 would be Ideal for you.
SM58 Specifications
Maximum SPL
142 dB with 800-ohm load
134 dB with 150-ohm load
Hum Pickup-7.5 dB equivalent SPL in a 1 millioersted field (60Hz)
Output Noise (equivalent sound pressure levels;measured with true rms voltmeter)
29 dB typical, A-weighted
32 dB typical, weighted per DIN 45 405
Dynamic Range
113 dB (maximum SPL to A-weighted noise level)
PM me if you are interested.
Regards
Mark
I just finished reading your issues with your microphone. I have a microphone for you that will do the job nicely.
It's an Shure SM58. You will find this microphone in almost every studio in the world. It's a basic dynamic microphone with a cardioid polar pattern.
I have 2 of theses and I don't really use them any more. I believe this microphone will suit you because of 3 things.
1) It's a dynamic microphone, which will be less sensitive to external noise.
2) It has a maximum SPL or 132dB or 142dB (depending on the load of your pre-map)
3) It's Free
A not about compression - yes it will take care of your overs but it will also bring up the noise floor. It may be entirely possible that the clipping and distortion might be your microphone actually distorting mechanically, and not electrically. Hence a high SPL microphone like the SM58 would be Ideal for you.
SM58 Specifications
Maximum SPL
142 dB with 800-ohm load
134 dB with 150-ohm load
Hum Pickup-7.5 dB equivalent SPL in a 1 millioersted field (60Hz)
Output Noise (equivalent sound pressure levels;measured with true rms voltmeter)
29 dB typical, A-weighted
32 dB typical, weighted per DIN 45 405
Dynamic Range
113 dB (maximum SPL to A-weighted noise level)
PM me if you are interested.
Regards
Mark