RAM problems! D:

[Dr. Derpy Hooves Ph.D]

Alright, so I'm no hardware expert, I have exceptional software knowledge for my age.

 

I bought a 2GB DDR3 RAM module for my Toshiba Satellite C655-S5123, It arrived just yesterday.

 

In order, here are the steps in which I installed it:

1) Powered down my PC

2) Removed the battery

3) Removed the panel on the bottom of my laptop

4) Inserted the RAM module

5) Screwed the panel back on

6) Put my battery back in

7) Powered my PC up

 

Nothing happened.

 

Did I mess something up? I installed it to the top RAM slot, the one above my pre-installed RAM module.

 

Thanks in advance.

[BTGBullseye]

This laptop? http://www.newegg.com/Product/Product.aspx?Item=N82E16834214385

 

If that's right, then did you check to make sure that you got the right speed RAM? (DDR3 is not a speed)

 

If you can provide a link to the exact RAM module you used it could prove to be very helpful...

[ProHypster]

There's only three things that could've done it.

 

You didn't insert it properly....

 

Wrong Ram type....

 

Something else isn't connected properly due to you disconnecting it while opening panel....

 

To check if it's ram:

 

Remove new ram and put old ram and see if the computer works then.

 

For Failure to add ram I have to press my epic fail button though

 

[Dr. Derpy Hooves Ph.D]

For Failure to add ram I have to press my epic fail button though

 

Alright, so I'm no hardware expert

 

-.-

 

I also finally installed my memory.